MST 20.2350 Motor control unit 1 motor END 20 230 V, control voltage 0-10 V
Product information "MST 20.2350 Motor control unit 1 motor END 20 230 V, control voltage 0-10 V"
The MST 20 automatically regulates your EWA drive to the specified position — based on a 0–10 V control signal from your on-site, higher-level control system. It is designed for pre-wired EWA drives with LSC 40* + LPR 02, END 20 + PAR 06 or PAR 10, and works with all LPR 02, PAR 10, and PAR 06 position repeaters. Alternatively, it can also be used without a position repeater as a time-based control (run-time measurement required); an automatic reference run every 48 hours ensures consistently precise positioning.
The volt-free output contacts for the "Open" and "Close" running directions switch up to max. 250 V / 16 A (5 A). The rugged plastic housing with IP 54 protection is designed for demanding continuous operation.
*When used with the LSC 40, an on-site 24 VDC power supply is required!
| Application: | 1 motor |
|---|---|
| Type of Activation: | 0-10V |
| Variant: | only for END 20 |
| Voltage (V): | 230 |
| Weight: | 0.9 |